Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fading in/out extrusion mesh of a spline?
#1
Hi.

Is there a way to have an extrusion mesh from the generator fade in or out to transparent for the last 0.2 of the spline for example? I'm just using a simple lit material.
Reply
#2
Hi
Not at the generator level. You can generate such transparency via shader, by setting it such as it fades when the V coordinate is between 0.8 and 1.0.
I hope this helped
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply
#3
Thank you!
Reply
#4
You are welcome
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Curvy discards Input Spline Range VoltDriver 3 3 11-28-2023, 07:14 PM
Last Post: _Aka_
  Guide to custom placing stuff on spline Lupos 15 37 11-27-2023, 12:51 PM
Last Post: _Aka_
  Get spline from generated mesh beartrox 1 2 11-27-2023, 12:30 PM
Last Post: _Aka_
  Making "gaps" in the generated spline mesh VoltDriver 6 19 11-22-2023, 11:34 PM
Last Post: _Aka_

Forum Jump: