11-28-2022, 10:52 AM
Hi
What you need is to set your own connections handling logic. The junction script is just an example that is meant for two splines, and is not supposed to be the fondation for elaborate connections.
To set your own connections handling logic, please refer to this:
https://curvyeditor.com/documentation/co...s_handling
and specifically, the Custom value. Reading the documentation of the ConnectedControlPointsSelector class should make things clear to you. If not, please let me know.
I hope this helped
Have a nice day
What you need is to set your own connections handling logic. The junction script is just an example that is meant for two splines, and is not supposed to be the fondation for elaborate connections.
To set your own connections handling logic, please refer to this:
https://curvyeditor.com/documentation/co...s_handling
and specifically, the Custom value. Reading the documentation of the ConnectedControlPointsSelector class should make things clear to you. If not, please let me know.
I hope this helped
Have a nice day
Available for freelance work, feel free to reach out: toolbuddy.net
Please consider leaving a review for Curvy, this helps immensely. Thank you.
Please consider leaving a review for Curvy, this helps immensely. Thank you.
