08-19-2022, 08:08 PM
Hi
No plans to do so, because doing so will go against other constraints. For example, imagine someone sets a constant mesh resolution of one polygons row every meter, then sets the length of the partial extrusion to 1.5 meters (out of a 2 meters spline). The 2nd row will be only half meter long. If the extrusion is on the full spline, the second row will be 1m long, and will not match the shape of the 0.5m long row. If we apply what you suggested, the shapes will match, but the total extrusion will have 3 rows, the first one of 1m length, and the two other of 0.5m length each, breaking the constraint of having 1m long rows.
I hope my explanation was clear.
No plans to do so, because doing so will go against other constraints. For example, imagine someone sets a constant mesh resolution of one polygons row every meter, then sets the length of the partial extrusion to 1.5 meters (out of a 2 meters spline). The 2nd row will be only half meter long. If the extrusion is on the full spline, the second row will be 1m long, and will not match the shape of the 0.5m long row. If we apply what you suggested, the shapes will match, but the total extrusion will have 3 rows, the first one of 1m length, and the two other of 0.5m length each, breaking the constraint of having 1m long rows.
I hope my explanation was clear.
Available for freelance work, feel free to reach out: toolbuddy.net
Please consider leaving a review for Curvy, this helps immensely. Thank you.
Please consider leaving a review for Curvy, this helps immensely. Thank you.