03-06-2022, 02:16 PM
Hi
You are indeed pointing out a limitation in the Input Spline Path module. But it should not be a problem, since you can define the range in the Shape Extrusion module too: First, remove the Range parameters you inputted in the Input Spline Path module, then use the Range and Length options in the Shape Extrusion module, under its Path tab.
Did this help?
You are indeed pointing out a limitation in the Input Spline Path module. But it should not be a problem, since you can define the range in the Shape Extrusion module too: First, remove the Range parameters you inputted in the Input Spline Path module, then use the Range and Length options in the Shape Extrusion module, under its Path tab.
Did this help?
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.