Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Generating Meshes
#1
I made this road:
https://gyazo.com/fda1bca0d673d4757c36a8353af36c7a

I have 2 questions:

1) Is it possible to use one Input Spline Path and instead of using Path > Range of Shape Extrusion module for specifying range ? I mean using Control Points instead of Range.
2) I use this Input Spline Shape for generating 2 lanes and for 4 lanes this one . My problem is I should change UV scale and offset to make them same when they are connected to each other. Is it normal or I can do something to perform this job automatically ?
With offsetting and scaling | Without offsetting and scaling
Reply
#2
Hi,
1) yes you can, using this.
2)If 2 lanes meshes and 4 lanes meshes use different materials, then maybe setting the material UV multiplier and offset can help, otherwise yes you will have to set it in the generator. The CG modules' properties are available through the API, so you can write a script to automate the modification of these properties if needed.
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Generating GO only on CPs in Generator GameDeveloperek4123 1 6 03-04-2024, 11:06 AM
Last Post: _Aka_
  Cant Generate Meshes At Runtime alms94 5 22 01-26-2024, 11:27 AM
Last Post: _Aka_
  Disable rebuild of meshes in dynamic mode Zilk1 1 8 10-04-2023, 09:50 AM
Last Post: _Aka_
  Combining two separate meshes ava_ava 2 7 07-26-2023, 05:49 AM
Last Post: ava_ava

Forum Jump: