11-22-2023, 03:03 PM
(This post was last modified: 11-22-2023, 03:05 PM by VoltDriver.)
(11-22-2023, 12:56 PM)_Aka_ Wrote: Hi
If you want to define a range between the last and first CPs of a closed spline, you will need to use the Range settings in Shape Extrusion. The ones from Input Spline Path are not compatible with such use cases for now.
I hope this helped.
Have a nice day.
First, thanks for the reply! Really cool to see you giving support. It is very much appreciated.
The issue with Shape extrusion range is that it seems to not cut the range in the right orientation for me: https://imgur.com/a/svSxjFG
It goes from the left side of my track to the right side, instead of forwards and backwards.
Is there somehing I did wrong?
Thanks!
EDIT: I think I have figured it out! I need to not edit the Cross section range, but the Path Range. By setting the length of the Path in shape extrusion to less than 1, the range now works properly to do what I want.
This is solved. Thank you!