07-26-2018, 04:11 PM
There is a simplar way:
- Set the Orientation to dynamic
- Rotate the last control point by 180° on the X axis. You can alternatively give the first control point a swirl on the anchor group of -0.5 turn
All the operations above are doable through the API.
Is my answer answer addressing your issue?
- Set the Orientation to dynamic
- Rotate the last control point by 180° on the X axis. You can alternatively give the first control point a swirl on the anchor group of -0.5 turn
All the operations above are doable through the API.
Is my answer answer addressing your issue?
Available for freelance work, feel free to reach out: toolbuddy.net
Please consider leaving a review for Curvy, this helps immensely. Thank you.
Please consider leaving a review for Curvy, this helps immensely. Thank you.