Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bending splines can break the mesh
#2
Hi
It is difficult to judge based on the videos, but I get the impression that the spline twists. Have you tried using different Orientation modes for the spline? https://curvyeditor.com/documentation/sp...rientation
To see the orientation of the spline, activate its gizmo using this: https://curvyeditor.com/documentation/to...ew_setings
If the issue is not related to the spline's orientation, can you send me a reproduction case so I can see what's wrong?
Thanks, and have a nice day
Please consider leaving a review for Curvy Splines, this helps immensely. Thank you.
Reply


Messages In This Thread
Bending splines can break the mesh - by yanke - 11-12-2021, 08:30 PM
RE: Bending splines can break the mesh - by _Aka_ - 11-12-2021, 09:54 PM
RE: Bending splines can break the mesh - by yanke - 11-14-2021, 07:04 PM
RE: Bending splines can break the mesh - by _Aka_ - 11-14-2021, 10:15 PM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Is there a way to generate UVs along deformed and copied mesh? kubak 1 516 03-18-2026, 08:34 PM
Last Post: _Aka_
  Connections Between Opposing Splines lockiidraws 1 755 12-04-2025, 02:14 PM
Last Post: _Aka_
  Replace deform mesh on volume spots Kokoriko49 1 2,477 06-09-2025, 06:49 PM
Last Post: _Aka_
  Spawn at start/ end of splines rickgplus 4 3,172 03-21-2025, 12:34 PM
Last Post: _Aka_

Forum Jump: