11-12-2021, 08:30 PM
Hi, Please see the video (WebP) first.
Case. angle 15: https://dotup.org/uploda/dotup.org2644572.webp
Case. angle 30: https://dotup.org/uploda/dotup.org2644574.webp
Case. angle 45: https://dotup.org/uploda/dotup.org2644575.webp
The mesh breaks at angle 45.
The mesh is generated using Curvy Generator, and the spline has 240 CPs.
I have moved the positions of each CP a little bit over time, so that when viewed from the front, the effect is as if you are going down a path over time.
However, if the angle becomes too steep, the mesh will break.
Does the mesh break when it is bent at such a steep angle?
The version we are using is the following.
Unity 2020.3.22f1
Curvy Splines 7.1.6
Case. angle 15: https://dotup.org/uploda/dotup.org2644572.webp
Case. angle 30: https://dotup.org/uploda/dotup.org2644574.webp
Case. angle 45: https://dotup.org/uploda/dotup.org2644575.webp
The mesh breaks at angle 45.
The mesh is generated using Curvy Generator, and the spline has 240 CPs.
I have moved the positions of each CP a little bit over time, so that when viewed from the front, the effect is as if you are going down a path over time.
However, if the angle becomes too steep, the mesh will break.
Does the mesh break when it is bent at such a steep angle?
The version we are using is the following.
Unity 2020.3.22f1
Curvy Splines 7.1.6