06-30-2020, 03:28 PM
Hi,
I would not advise you to use an invisible material in the middle because your mesh (like every mesh) is hollow in the middle, so if you make a part invisible, you will see whole at the junction points between both materials. The proper way in my opinion is generating two meshes, one for each rail.
You can use the Path Relative Translation module to make the path for the second rail from the first one: https://curvyeditor.com/documentation/ge...ranslation
About where the materials are assigned, you can learn more about that in the documentation:https://curvyeditor.com/documentation/generator/modules/shapeextrusion#materials
The example scene 26_CGExtrusionExtendedUV is also a good learning material.
Sorry for not answering earlier, but I was (and still am) busy these days with migrating my websites to a new web hosting service.
Have a nice day
I would not advise you to use an invisible material in the middle because your mesh (like every mesh) is hollow in the middle, so if you make a part invisible, you will see whole at the junction points between both materials. The proper way in my opinion is generating two meshes, one for each rail.
You can use the Path Relative Translation module to make the path for the second rail from the first one: https://curvyeditor.com/documentation/ge...ranslation
About where the materials are assigned, you can learn more about that in the documentation:https://curvyeditor.com/documentation/generator/modules/shapeextrusion#materials
The example scene 26_CGExtrusionExtendedUV is also a good learning material.
Sorry for not answering earlier, but I was (and still am) busy these days with migrating my websites to a new web hosting service.
Have a nice day
Available for freelance work, feel free to reach out: toolbuddy.net
Please consider leaving a review for Curvy, this helps immensely. Thank you.
Please consider leaving a review for Curvy, this helps immensely. Thank you.
