Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Make hard angle
#1
Hello,

I' trying to make a hard angle wall with spline and generator but can't find a good way for the outside corner !
   
Do you have a solution ?
And another question, how to splite the mesh by segment between the corners ?

Thank you ! Your asset is awesome !
Reply
#2
Hi

Thanks for your praise.

Unfortunately, those corners are hard to make using Curvy. I am planning on fixing this in the 8.x.x cycle. I will keep you updated once I have something to share. Until then, a really not ideal solution would be to invert the extrusion: make the wall base as the extrusion's cross, and make a linear spline with the length of the wall as the extrusion's path.

Mesh splitting based on an angle or control points is not a feature of Curvy. This would be an interesting feature, will add it to the todo list.
As a work around, you can modify the code of the Volume Mesh module (Curvy\Base\CG Modules\BuildVolumeMesh.cs) to replace the existing logic of mesh splitting every X distance with a logic that would split at specific distances. Changing that logic should not be difficult. Then you can make a script that will fill those specific distances based on the distance of control points of a given spline. Was my explanation clear?

Sorry for not having a better answer.
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply
#3
Hi,

Thank you for your response.

I look for modify BuildVolumeMesh.cs and i'm getting back to you.
Ok i wait for the a new version Wink

Have a good day.
Reply
#4
Thank you
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply
#5
(03-22-2021, 05:27 PM)_Aka_ Wrote: Thank you

Hi,

Do you have some news for make hard angle ?

Thanks.
Reply
#6
Sorry, nothing new to announce
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
Brick Extending Curvy to make a Hallway editor. JacobSL 3 123 10-13-2021, 05:09 PM
Last Post: _Aka_
  How to make dashed lines? Econt 3 1,507 08-13-2020, 01:47 PM
Last Post: _Aka_
  Make GameObject Face towards Spline Path linkinballzpokemon 5 2,129 07-14-2020, 08:27 PM
Last Post: _Aka_
Wink How to generate right angle road oscar.ken 6 4,353 04-30-2020, 05:38 PM
Last Post: ThomasTheTank

Forum Jump: