Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Using shape extrusion with small shapes
#3
I was able to get that to work by increasing the cache denisty to 100 and the max points per unit to 400 (that gave me 10 cross samples, the spline length is only 0.02).

Is there a reason the include cp option doesn't work for the input spline path on a shape extrusion?  That would be my preferred way of controlling it, as it is currently I will have to do calculations every time to find the diameter of the wire (as they aren't all the same) and then back out the appropriate max points per unit to make sure I have my target sample number, if I could just use the include cp option it would save me that headache.
Reply


Messages In This Thread
RE: Using shape extrusion with small shapes - by amccraw - 02-14-2020, 02:13 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Flip Shape On Generator Hitsu San 1 120 01-21-2020, 12:53 AM
Last Post: _Aka_
  UV issue with variable mix shape modifier MarioBag 4 547 12-07-2019, 01:43 PM
Last Post: _Aka_
  Shape Extrusion Scale maabed 5 630 11-06-2019, 04:14 PM
Last Post: _Aka_
  Same Spline Extrusion with variable width MarioBag 5 1,415 11-04-2019, 01:56 PM
Last Post: _Aka_

Forum Jump: