Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rough edges on tight corners
#5
(03-17-2023, 12:16 PM)migwellian Wrote: It's interesting to hear that there isn't a general solution to the problem.
Well, no general solution I am aware of. I might be wrong, maybe there is something out there. If so please let me know.

(03-17-2023, 12:16 PM)migwellian Wrote: For a while I was trying to implement my own solution - I looked into both offset curves and sweeping, but haven't reached a solution. Is that something you've ever looked into?

I looked into it some time ago but not very deeply/methodically. The solution I found was to punctually reduce the width of the track when the turns are too sharp.

I hope this helped, and please keep me updated if you find anything interesting regarding this subject.
Please consider leaving a review for Curvy. This will help a lot keeping Curvy relevant in the eyes of the Asset Store algorithm.
Reply


Messages In This Thread
Rough edges on tight corners - by migwellian - 03-16-2023, 02:01 PM
RE: Rough edges on tight corners - by migwellian - 03-17-2023, 10:00 AM
RE: Rough edges on tight corners - by _Aka_ - 03-17-2023, 10:33 AM
RE: Rough edges on tight corners - by migwellian - 03-17-2023, 12:16 PM
RE: Rough edges on tight corners - by _Aka_ - 03-18-2023, 05:47 PM
RE: Rough edges on tight corners - by migwellian - 03-20-2023, 09:48 AM

Possibly Related Threads…
Thread Author Replies Views Last Post
  Ball jumps on colliders edges Dmitrii_Dzh 8 25 04-26-2022, 02:17 PM
Last Post: _Aka_
  Mesh Lines - Horizontal and Vertical Edges Krypton 14 4,759 09-23-2020, 02:16 AM
Last Post: Krypton
  How to spawn GameObjects on corners of the liinear spline? Pixel Flipper 7 5,083 09-18-2019, 07:03 PM
Last Post: _Aka_
  Mesh Generator, Hard / Faceted Edges? nomadigi 2 4,674 01-31-2018, 04:54 PM
Last Post: nomadigi

Forum Jump: