02-19-2021, 09:30 PM
Hi
The Range parameter allows you to make an extrusion on a subsection of the path spline.
https://curvyeditor.com/documentation/ge...#reference
For N holes, you will need to have N+1 extrusion modules (basically N+1 solid sections of the path). This can be tedious to do by hand. I recommend using the API to automatically create and configure the modules. You can see that done in the Infinite Track example scene.
Maybe, depending on your specific case, you can have the desired effect by extruding the mesh on the whole path, but scaling down the extrusion in the parts that will be hidden by the obstacles.
https://curvyeditor.com/documentation/ge...sion#scale
I hope this helped
Have a nice day
The Range parameter allows you to make an extrusion on a subsection of the path spline.
https://curvyeditor.com/documentation/ge...#reference
For N holes, you will need to have N+1 extrusion modules (basically N+1 solid sections of the path). This can be tedious to do by hand. I recommend using the API to automatically create and configure the modules. You can see that done in the Infinite Track example scene.
Maybe, depending on your specific case, you can have the desired effect by extruding the mesh on the whole path, but scaling down the extrusion in the parts that will be hidden by the obstacles.
https://curvyeditor.com/documentation/ge...sion#scale
I hope this helped
Have a nice day
Available for freelance work, feel free to reach out: toolbuddy.net
Please consider leaving a review for Curvy, this helps immensely. Thank you.
Please consider leaving a review for Curvy, this helps immensely. Thank you.
